You are viewing our archives
The content in our archives has been transferred from our previous website (pre 2024). It may be out of date or missing links.
If you are looking for something specific try searching or contact us.
Planning and Design Process
New axis
The extension is built on the Western side of the existing centre and as part of the design process a new East/West axis was established through the middle of the building, between the entrance and the existing reception area. Access to the first floor library, meeting room and turf-roofed deck is via a spiral staircase; whilst the ground floor comprises the entrance/reception, café, internet access area and information centre.
Materials
The building structure is timber-framed, whilst the roof is covered by an area of turf. The principal front wall was re-built using stone from the existing perimeter walls. The second phase of development included sculpture and glass works created from sustainable sources by sculptor Roger Moss and glass artist David Pearl. The external signage was created by Brenda Oaks.
Sustainability Outcomes
Materials
All timber was either FSC certified or taken from sustainable local sources and insulation was recycled newsprint for the walls and cork below the turf roofs. Various recycled materials were used for the interiors, including; door mats recycled from lorry tyres, reception desks incorporating recycled aluminium and glass, door fittings cast using recycled aluminium , café furniture fabricated from cable drums and circular windows fabricated from oak thinning.
Heating and cooling
The building is naturally ventilated and hot air is expelled via a solar ventilator, below which are 8 built in solar powered extractor fans. The photovoltaic cells power a battery and computer which constantly monitors temperatures. A series of solar water heating panels on the south-facing roof of the main building assist with heating water. The building has a water-based underfloor heating system. The west-facing double glazing was sand blasted in critical areas to limit solar heat gain.
Related links
Air Architecture